Samurai utilized the katana sword for practicing various types of martial arts and on the battlefield. One of the traditional Japanese martial arts that originated from samurai fighting with bamboo swords is called kendo. Kendo players usually wear protective gear like armor.
Remember that the samurai utilized the katana for a variety of self defense products. Because the blade of a katana you can find at katanasforsale.com is very sharp, you need to be careful when it comes to unsheathing and sheathing the sword. This article discusses how you can sheath and unsheath a katana.
Unsheathing a katana
You need to push the guard of the katana from the scabbard using your non-dominant thumb. You can then hold onto the scabbard utilizing the non-dominant hand so that your thumb rests on top. Then place your thumb on the circular guard around the katana’s handle and lightly push it forward. There is a chance that you may feel some friction as the blade slides within the scabbard.
It’s worth noting that the scabbard tends to hold the blade in place close to the guard so that it doesn’t slip out accidentally. Therefore, you should avoid pushing the blade out too far to prevent it from falling out from the scabbard.
When it comes to pulling the blade out by its handle, you can reach the front of your body and use your dominant hand to hold onto the handle at least 1 inch from the guard. You can then push down the handle lightly while pulling it out so that its cutting edge doesn’t hold onto the scabbard as you remove it. You can pull the blade out and point the tip out in front of your body. A katana usually has a dull edge and a sharp cutting edge, so be careful where you hold the blade when it’s out of the scabbard.
Sheathing a katana
You should wrap your hand around the scabbard’s end when sheathing it. Then cup the scabbard’s bottom close to the opening on the end to make sure your non-dominant hand has a U-shape. And, wrap your thumb around the scabbard’s top to hold it in place so that it doesn’t move around when you attempt to insert the sword.
The next step is to direct the tip of the sword into the scabbard’s hole. You can then carefully and slowly turn the blade’s tip toward the scabbard so that the cutting edge points up. Now, you can set the dull edge of the katana on your fingers below the opening of the scabbard and utilize your dominant hand to force the tip inside the scabbard. You should always keep on having a firm grip on the scabbard after putting the tip in.
Lastly, push in the sword until there is at least 1 inch of the blade exposed. Then you can slowly push into the scabbard the rest of the blade by using your dominant hand. The cutting edge should not be allowed to scrape the scabbard’s top because it can dull the blade.
