Lighting is important in every room of your house but, the bathroom is generally considered one of the most important places to get it right. The reason is obvious; your bathroom is where you get ready and make sure you look your best. That means you need plenty of light to enable you to see what you are doing.
But, at the same time, the lighting cannot be too harsh and it should be possible to dim the level to create the right ambiance for your shower or relaxing bath.
Before you start thinking about the best bathroom lighting possible you should be aware of the regulations. The majority of the wiring in your bathroom will need to be done by a qualified and registered electrician Sydney. This is because bathrooms are dangerous places, electricity and water do not mix well together.
Plenty of light is essential to ensure you can see all the details when you get ready for that special occasion. But, before you decide on the lighting level you should consider who is using the bathroom. It has been shown that older people generally require up to three times as much light to see as clearly as a twenty-year-old.
The key, if you have older people in your home, is to ensure the lights are bright and you have a dimmer switch to control it.
Your bathroom is separated into three separate zones, known as A, B, and C. The zones correspond to approved lighting fixtures. For example, lighting in zone C is the same as the lighting in any other part of your home. But, lighting in zone A is the most at risk of being splashed with water and therefore needs to meet pre-defined standards.
It is important to use the right fixtures for each section of your bathroom.
Water is very good at conducting electricity, that is why the two substances don’t mix well, they increase the likelihood of electric shocks. For this reason, no switch can be positioned too close to a water source. It is the reason why registered electricians are supposed to do the wiring in your bathroom.
Your insurance company may not be prepared to honor the policy if you have had alterations done to your bathroom electronic and they have not been completed or approved by a qualified electrician. It is important to be aware of this because if something bad were to happen it could leave you seriously out of pocket.
Don’t Forget The Bulb
Today there is a huge array of bulbs to choose from. However, when you are considering bathroom lighting you should choose a bulb of at least 100W or the energy-efficient equivalent.
It is also a good idea to choose one that has a color temperature between 2700 and 3000K. This will ensure the most flattering light in your bathroom. LED bulbs are generally agreed to be the best option for lighting and water resistance, it is worth using these in your bathroom.